- Model NO.: B2001
- Material: Steel
- Surface Treatment: Nitride
- Average Wall Thickness: >3mm
- Certification: SGS
- Condition: New and Repeated
- Specification: As per the actual mould size
- HS Code: 8480411000
- Application: Lighting
- Demoulding: Automatic
- Using Hardness: HRC46+/-1
- Mould Life: 120k
- Customized: Customized
- Trademark: Precisioner
- Origin: China
Part Material: A360
Part Dim.: 350*1106*127/mm
Mold Structure: 2-plate
Cavity Number: 1x1
Slide Number: 0
DCM Tonnage: above 2000T
Mold Dim.: 1970*980*810/mm
Lead-Time: 50 days
For mold price, please ask me or request for customized die casting tooling.
This product is large in size, and the direct filling distance is up to 1106 mm. There are many through areas in the part and the ribs are quite thin, it requires very high on designing the overflow system and thermal control system, so as to achieve an ideal filling and forming result.
Characters of Mold for Heat Sink Products
1. Mold manufacturing: The main characteristic of heat sink part is that it has many ribs, and electrode discharging and polishing are the main manufacturing processes on the mold, whose costs are both relatively high.
2. Part forming: For ribs (especially for deep and thin ribs), venting is difficult and it tends to trap easily. In the meanwhile, the ribs are hard to form, and the venting system is hard to design on the mold. This is why vacuum system should be applied to this type of products sometimes.
3. Common problems of mold during production: Die Sticking, Die Cracking:
A. Die sticking: For this kind of mold, die sticking happens easily because the strength of ribs is usually weak, and the temperature is very high on the mold's rib feature during mass production. To this issue, we usually suggest to apply nitridation on the mold cavity surface to improve surface hardness and smoothness, so as to decrease the rate of die sticking.
B. Die cracking: This kind of mold is easy to crack earlier than usual mainly due to following reasons:
a. EDM machining will produce steel stress on the mold;
b. Hardness of ribs on mold insert is lower than usual;
c. Heat will concentrate in the ribs on mold insert during mass production.
Geneally, tempering will be applied to the mold after EDM machining; When production reaches 2000-5000 shots (depending on the mold dimension), the mold should be tempered the second time. The mold can be maintained in a common way after these two times of tempering, but the first two times are especially important.
Brief Introduction of Precisioner
Company Name: Shenzhen Precisioner Diecasting Mold Co., Ltd.
Location: Shenzhen City, Guangdong Province, China
Founded in: 2009
Total Area: 43,000 square feet
Total Employment: around 110
Project Engineers: 17
Design Engineers: 12
Manufacture Engineers: 50
Mold Trial Engineers: 3
Quality Control Engineers: 8
Overseas Sales: 15
Business Range-Design and Manufacture:
a) High pressure die casting die (for Aluminum & Zinc parts, Vacuum System optional);
b) Trim tool;
c) Rapid prototype die casting die;
d) DME quick-change replacement unit die;
e) Separate components of all the above kinds of tools, such as mold base (retainer/holder block), replacement mold insert (cavity block), sub-insert, core pin, ejector pin, shot sleeve, sprue bush, sprue spreader, etc.;
f) Small lot production (pilot run) up to 1,000 shots with simplest post treatments, such as removing runners, overflow wells, flashes and burrs, for urgent projects.
For regular customers, we can also provide some engineering services, such as making DFM reports to help analyze a part, running a casting simulation, designing any kinds of tools described above, CNC machining parts for evaluation, etc.
Automobile, Motorcycle, Aviation, Telecommunication, Medical Devices, Electrical Instrumentation, Machinery Equipment, Daily Hardware, Furniture Accessories, etc.
Now we have regular customers from countries all over the world, such as the USA, Canada, Mexico, the UK, Germany, Italy, Denmark, Croatia, Poland, Australia and New Zealand, etc.
Our factory has passed ISO 9001:2008.
ISO 14000 and TS16949 are also on our agenda.
DME, HASCO, NADCA
a) ZW-CAD, and Auto CAD for 2D drawing;
b) UG for tooling design, and we can also accept and process the files from SolidWorks, ProE and CATIA;
c) Flow-3D for mold flow simulation, and now we are also studying EKK and Magma and hopefully will adopt in the future.
ASSAB 8407 (Orvar Supreme) and ASSAB 8418 (Dievar) made by Uddeholm and imported by ASSAB Asia are the most frequently used materials for die cast mold insert, and ASSAB XW-42 from the same supplier is the most frequently used material for trim tool cutter. Original material certificates of purchase and heat treatment will be shipped together with the tooling we deliver to the customers.
T1 trial Success Rate
Over 95% of our built molds have been successful during T1 trial and then were directly put into mass production on our customer side, so sometimes some customers told us to immediately ship the tooling to them soon after manufacturing completed for some urgent projects.
The smallest mold we've built was fit on 60T die cast machine;
The largest mold we've built was fit on 2,500T die casting machine;
The largest die cast machine we can access for mold trial is 3,200T;
The largest die weight we can handle is ≤ 15T;
The largest dimensions of mold we are able to build are as shown below:
a) Mold Insert: 900mm*1,600mm (designed and manufactured by Precisioner)
b) Mold Base: 2,000mm*1,500mm*1,500mm (cooperating with our mold base supplier)
Monthly: around 45 sets of mold (one set means one die casting die and one trim die)
Yearly: around 500 sets of mold (one set means one die casting die and one trim die)
Short Lead Time (from approval of the tooling design to T1 mold trial)
A) Estimated by mold size of longest side:
3-4 weeks: <500mm
4-7 weeks: 500-800mm
7-9 weeks: 800-1,200mm
9-12 weeks: 1,200-1,500mm
B) Estimated by die casting machine tonnage that runs the mold (by approximate statistics, in calendar days):
32 days: tonnage<500T
38 days: 500T<tonnage<800T
42 days: 800T<tonnage<1,600T
48 days: 1,600T<tonnage<2,500T
Due to our grand development goals, we have adopted transparent and low rate of Return On Investment (ROI) policy as shown below:
1. For Die Cast Dies that fit DC machines > 800T, the ROI is only 12%!
2. For Die Cast Dies that fit 500T ≤ DC machines ≤ 800T, the ROI is only 17%;
3. For Die Cast Dies that fit DC machines < 500T, and all other kinds of tooling, the ROI is only 20%;
Transparent Price Structure
A simplified Quotation Sheet will be provided together with a Breakdown List that shows the price structure of tooling in detail, such as Design, Material Manufacture, Management, Profit Rate and Tax, etc.
a) Responding emails within 24 hours;
b) Offering quotation within 2 working days after the whole RFQ details received;
c) Providing DFM report and mold flow analysis report within 3 working days;
d) Providing initial tooling design within 3 working days;
e) Updating manufacturing progress plan every week after tooling design approval;
f) Sending in mold trial videos and sample photos within 2 working days after mold trial;
g) Shipping the mold trial samples within 2 working days after mold trial;
h) Sending in the sample inspection report in 3 working days after mold trial;
i) Shipping the tooling using your appointed freight forwarder or using our frequently-used forwarder within 4 working days after your approval;
j) Supplying all the following files together with the tooling: Mold Operation Instructions, Mold Trial Report and Recommended Casting Parameters, Steel Purchase Certificate and Heat-Treatment QC Report, Complete Mold Drawings, Mold Maintenance Recommendation, and so on.
Project Control-Five Meeting System
a) Project scheme review meeting-DFM confirmed;
b) Design review meeting-Initial Tooling Design confirmed;
c) Manufacture review meeting-Work Progress Plan confirmed;
d) Mold trial review meeting-Mold Trial Parameters & Process confirmed;
e) Summarization meeting after tooling delivery-Work Improvement Points confirmed.
6 CNCs: JTGK, GDM, MAKINO, HAWEST STAR
5 EDMs: JIAHENG, ESLY, HSPK
6 WEDMs: DAYU, XINKUAI
1 CMM: AEH
1 Fitting Machine(trim press): Nice 70T
2 Die Cast Machines for Die Trial only: LK IMPRESS-III 500T and 800T
1 Double-System Mold Temperature Controller (Die Heater): Aode
215 Fixtures: EROWA
1 Radial Drilling Machine: YILI
4 Milling Machines: DIC-W
2 Grinding machines: KENT
1 Lathe: NANHAI
4 Cranes: 5T, 7.5T, 5T+10T, DAXINGFA, YONGTONG
and many other ancillary facilities...
Precisioner's Vision, Mission and Values
Vision: To be the leading enterprise worldwide on designing and manufacturing die casting molds.
Mission: Focusing on customers' demands and challenges, supplying reliable die casting molds and holistic solutions, and persistently promoting customers' competition.
Values: Honesty, Responsibility, Concentration, Proactivity.